High accuracy Avian influenza (H5N1) Antibody ELISA Test kit,
96wells/kit,proffesional use
1. Summary
This kit use AIV H5N1 solid phase antigen to detect specific
antibody against AIV H5N1 antigen, have high sensitivity,
specificity, reproducibility, and is easy to operate quickly and
can be used dividually in multiple times.
2. Reagents and contents
| 1 | H5N1 Antigen coated Plate | 96T×1 |
| 2 | Enzyme conjugate H5N1-Ab (No.1 solution) | 6 ml×1 |
| 3 | Washing solution (No.2 solution) | 50ml×1 |
| 4 | Substrate A (No.3 solution) | 6 ml×1 |
| 5 | Substrate B (No.4 solution) | 6 ml×1 |
| 6 | Sample diluent ( No.5 solution ) | 50 ml×1 |
| 7 | Stop reaction solution ( No.6 solution ) | 6 ml×1 |
| 8 | Positive control H5N1-Ab | 0.8 ml×1 |
| 9 | Negative control H5N1-Ab | 0.8 ml×1 |
| 10 | Adhesive Foil | 2 pieces |
| 11 | Sealed bag | 1 piece |
| 12 | Instruction | 1 piece |
3. Materials Required But Not Provided
1 Microplate Reader (Including Wavelength 450nm/630 nm).
2 37℃ Constant temperature box
3 Micropipettes, adjustable.
4. Sample requirement
1. The samples are serum, storage time should be for 7 days at 2-8
℃, if for long term, it should be kept at -20℃ or below it. Avoid
repeated freezing and thawing.
2. Avoid to use the samples containing sodium azide, high
cholesterol, with bacteria and severe hemolytic
5. Test procedure
1. Washing solution preparation
Dilute washing solution (No.2 solution) with distilled water or
deionized water at 1:10, e.g. add 900ml distilled water or
deionized water in 100 ml washing solution, and mix thoroughly.
2. Sample diluent:
Dilute the serum sample with sample diluent (No.5 solution) at
1:100, e.g. 5 μl serum + 495 μl sample diluent, mix thoroughly.
3. Adding samples and controls
For each test, set 2 wells for Negative control, 2 wells for
positive control. Add negative control, positive control
respectively, 100μl/well. Set one blank control well, add nothing.
For sample well, add diluted serum sample, 100μl/well. Incubation at 37 ℃ in dark for 30 minutes. Discard liquid of the wells and fill all wells with diluted
washing solution, incubate for 1 minute and discard. Repeat washing
procedure 3 times as above. At the end of the washing step,
carefully remove remaining fluid by tapping the strips on the
tissue paper prior to the next step.
4. Adding Enzyme conjugate
Apart from the blank control well, add 100ul Enzyme conjugate (No.1
solution) into all wells and incubate at 37 ℃ in dark for 30 minutes. Discard liquid of the wells and wash 3 times as described in step
3.
5. Adding substrates
Mix Substrate A (No.3 solution) and Substrate B (No.4 solution) in
equal volumes, add into each well, 100μl/well, incubate at 37 ℃ dark for 10 minutes.
6. Add one drop of Stop reaction solution ( No.6 solution ) into
all wells. Before reading results with ELISA microtiter plate
reader, set the reagent blank well A1 to zero . Measure the OD
Value of all wells at 450 nm (reference wavelength: 630 nm).
6. Reference
Validation judge
OD Value of negative control well ≤0.15 (Invalid if > 0.15);
OD Value of positive control well ≥0.30 (Invalid if < 0.30).
7. Interpretation of results
OD value of sample ≥ OD Value of Positive control mean X 1.1: H5N1
Antibody Positive;
OD value of sample ＜OD Value of Positive control mean X 0.9: H5N1
Antibody Negative;
OD Value of Positive control mean X 0.9 < OD value of sample<
OD Value of Positive control mean X 1.1: Skeptical, this sample
need review;
OD Value of sample review ≤OD Value of Positive control mean X 1.1:
H5N1 Antibody Negative
8. Limitation
This kit is only suitable for testing chicken serum.
9. Notes
1) Microwell should be sealed and moisture-proof. MicroWell plate
removed from the refrigerated environment should be balanced
moisture to dry at room temperature, then can be opened. Put back
unused MicroWell plate into dry foil bag and sealed at 4 ℃.
2) Before dropping reagent, shake dropping bottle gently to even,
discard the first drop; Keep the dropping bottle upright when
adding reagents.
3) Cover the gap tightly after using every time. Do not mix using
the cap. Do not use reagents from different lot.
4) Treat the used kits and reagents as pollution material. The stop
solution is corrosive, be careful to use.
| ORIENT NEW LIFE MEDICAL CO., LTD. |
| Contact: | Jerry Meng |
| Email: | Jerry @ newlifebiotest .com |
| Tel. | +86 18657312116 |
| SKYPE | enetjerry |
