Endoscopic stapler and rotated laparoscopic stapler cartridge
Key features and benefits:
1, Tri-staple Tech (Most important difference)
Please kindly refer to attached picture A, you will find the staple
leg heights from inner to outer is different, this will be more
adaptive to various tissue thickness. Besides, this design will
improve tissue healing for blood to easier reach cutting edge.
2, Stepped reload surface
Please kindly refer to attached picture A, the cartridge surface of
IV generation is stepped, this will providing lateral dispersion of
tissue fluid to facilitate compressing and firing. Also this design
will prevent the distal-end tissue from being squeezed out to
ensure effective stapling length.
3, Fixed Anvil
Please kindly refer to attached picture B, the anvil of new
generation is fixed while III generation is fixed cartridge.
In surgery the thin anvil will easily pass through gaps and this
will reduce the tissue damage.
Besides, when close the jaw, cartridge clamp into anvil, clamping
force will be much bigger than anvil clamp into cartridge. Because
of the bigger clamping force, after close the jaw, the tissue will
not able to drop out, this is a big improvement than III
generation.
Function
Disposable Endo GIA Stapler places two, triple-staggered rows of
titanium staples and simultaneously divides the tissue between the
two, triple-staggered rows. The stapler can take the place of
handwork to cut and suture the tissue at the same time. By using
the stapler can shorten operation time, decrease the work of
doctors,and avoid the possibility of cross infection.
Products Inforumation
1.Endoscopic Stapler
| Model No. | Shaft Length | Compatible Reload | Usage |
| QLCE-I, QLCE-II, QLCE-III | 160 | QLCEC-30A,B,C QLCEC-45A,B,C, QLCEC-60A,B,C, QLCEL-30A,B,C
QLCEL-45A,B,C QLCEL-60A,B,C | Endoscope Operation in abdominal, gynecologic,pediatric and
thoracic surgery for resection, transection and creation of
anstomosis. |
2. Reloads
| Model No. | Color | Nail Height (mm) | Suture length (mm) | Suturing Thickness (mm) | Usage |
| Articulating Stapler Reload |
| QLCEL-30A | Black | 4.8 | 30 | 2.0 | Normal Tissue |
| QLCEL-30B | Violet | 3.5 | 30 | 1.5 | Thin Tissue |
| QLCEL-30C | White | 2.5 | 30 | 1.0 | Thinner Tissue |
| QLCEL-45A | Black | 4.8 | 45 | 2.0 | Normal Tissue |
| QLCEL-45B | Violet | 3.5 | 45 | 1.5 | Thin Tissue |
| QLCEL-45C | White | 2.5 | 45 | 1.0 | Thinner Tissue |
| QLCEL-60A | Black | 4.8 | 60 | 2.0 | Normal Tissue |
| QLCEL-60B | Violet | 3.5 | 60 | 1.5 | Thin Tissue |
| QLCEL-60C | White | 2.5 | 60 | 1.0 | Thinner Tissue |
