Laparoscopic Surgery Ultrasonic Surgical Scalpel shears scissor
Description:
We have 4 kinds of shear with different length, 45cm, 36cm, 23cm,
14cm. And we are working on producing the non-detachable hand
piece. It has the record function.During the operation, if there is
any system error, the alarm indicator will display the problem on
the screen in text, troubleshoot and restart the operation. It will
save the time. But the harmonic, if there is any system error, you
have to go to the reference book to find it. It will cost the
doctor’s time and energy.
The blade tip part is the key part. The material of it is very
important. As to the tissue spacer, we used Teflon, which is a kind
of aerospace mat material of heat resistance. It is a kind of
soft-contact material, it can prevent adhesion and enhance the
grasping force.
Our closing trigger and handle design conforms to human
engineering, with anti-slip rubber coating. It can increase the
friction, reduce fatigue and make operation more stable.
Indications
The Harmonic Scalpel System is indicated for soft tissue incisions
when bleeding control and minimal thermal injury are desired. The
System instruments can be used as an adjunct to or substitute for
electrosurgery, lasers, and steel scalpels.
Products Specifiation
| Description | Code | Shaft Diameter | Shaft Length | Tip |
| Harmonic Scalpel Shear | OR14 | 5mm | 14cm | Curved |
| OR23 | 5mm | 23cm | Curved |
| OR36 | 5mm | 36cm | Curved |
| OR45 | 5mm | 45cm | Curved |
Operation
Refer to a compatible Ultrasonic Generator User Manual for hand
piece attachment and system operation instructions.
1. Connect the assembled Hand Piece and instrument to the generator
and turn the generator power on. Do not turn the generator power on
before the Hand Piece and instrument are connected to the
generator.
2. Select the desired variable or minimum power level using the
INCREASE and DECREASE buttons on the generator.
Minimum starting power level defaults to power level 3. For greater
tissue cutting speed use a higher generator power level, and for
greater coagulation use a lower generator power level. The amount
of energy delivered to the tissue and resultant tissue effects are
a function of many factors, including the power level selected,
blade characteristics, grip force, tissue tension, tissue type,
pathology, and surgical technique.
MAX power is set at power level 5 and cannot be adjusted.
3. The HARMONIC Shears instrument may be operated with either the
foot switch or hand control. For foot switch or hand control
function, refer to a compatible Harmonic Generator User Manual for
further detail and setup and operation instructions.
4. For optimal performance, clean the instrument blade and clamp
arm throughout the procedure by activating the instrument tip in
sterile saline. The instrument can be wiped with a sterile moist
gauze sponge to remove tissue, if necessary.
WARNING: Do not touch the instrument to metal while activated. See
Warnings and Precautions.
The main components
generator,hand piece transducer,hand piece scalpel,foot switch as
below:
| System Name | System Model | Componnt name | Component models | Remark |
Ultrasonic Scalpel System |
RXC-300 | generator | RXC-300 | Driving frequency: 55.5KHz |
hand piece transducer | HPT55.5S | Connection gun type of Hand piece scalpel |
| HPT55.5B | Connect the scissors type of Hand piece scalpel |
| foot switch | FSW01 | Anti-infusion IPX8 |
hand piece scalpel | HPS36P | laparoscopic surgery |
| HPS23P | For open surgery |
| HPS14P | For superficial surgery |
| HPS9B | uperficial surgery |
FAQ
1. Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing Medical Device more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Jiaxing city, Zhejiang Province, China.
It is about more than 1 hours from Shanghai.
2. 3.Q:Can you make samples?
A: Yes, we can make samples for you.
4.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in
different post, and there are three inspectors before packing to
get best quality products.
5.Q: How is your post market service ?
A: If any damaged rings in the course of carriage, with the
checking it's our mistake, we will take full responsibility to compensate the customers.
6.Q:Can you do OEM for us?
A: Certainly. We also can build the moulding for our new customer.
7.Q:Does the price include freight?
A:No, please choose the express service provider or negotiate with
us.
